Allied Telesis AT-8100L/8 User Manual page 1860

Chapter 107: Routing Information Protocol (RIP) Commands
Command
"NO AUTO-SUMMARY" on page 1875
"NO DEFAULT-INFORMATION
ORIGINATE" on page 1876
"NO IP RIP AUTHENTICATION
MODE" on page 1877
"NO IP RIP AUTHENTICATION
STRING" on page 1878
"NO IP RIP RECEIVE-PACKET" on
page 1879
"NO IP RIP RECEIVE VERSION" on
page 1880
"NO IP RIP SEND-PACKET" on
page 1881
"NO IP RIP SEND VERSION" on
page 1882
"NO IP RIP SPLIT-HORIZON" on
page 1883
"NO NETWORK" on page 1884
"NO PASSIVE-INTERFACE" on
page 1885
"NO ROUTER RIP" on page 1886
"NO TIMERS BASIC" on page 1887
"NO VERSION" on page 1888
"PASSIVE-INTERFACE" on
page 1889
1860
Table 258. RIP Commands (Continued)
Mode
Routing
Configuration
Routing
Configuration
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
Routing
Configuration
Routing
Configuration
Global
Configuration
Routing
Configuration
Routing
Configuration
Routing
Configuration
Description
Disables automatic route
summarization.
Stops the switch from sending the
default route.
Restores the default value of plain-text
authentication mode.
Deletes the specified authentication
key or password.
Disables the VLAN interface to
receive routing updates.
Deletes the version of the routing
updates that the routing interface
accepts.
Disables the VLAN to send routing
updates.
Deletes the version of the routing
updates that the routing interface
sends out.
Disables split horizon or split horizon
with poison reverse.
Stops the specified network or VLAN
from sending and accepting routing
updates.
Allows the switch to send route
updates from the specified VLAN
interface.
Stops the RIP process and erases all
existing RIP configurations on the
switch.
Resets update, timeout, and garbage
timers to the default values.
Resets the RIP version to the default
value of Version 2.
Prevents the transmission of routing
updates through the routing interface
in the specified VLAN.