Allied Telesis AT-8100L/8 User Manual page 1693

Command
"POLICE SINGLE-RATE ACTION" on
page 1749
"POLICE TWIN-RATE ACTION" on
page 1751
"POLICY-MAP" on page 1753
"SET COS" on page 1754
"SET DSCP" on page 1756
"SET QUEUE" on page 1757
"SERVICE-POLICY INPUT" on
page 1759
"SHOW CLASS-MAP" on page 1760
"SHOW POLICY-MAP" on page 1761
"SHOW MLS QOS" on page 1763
"SHOW MLS QOS AGGREGRATE-
POLICER" on page 1764
"SHOW MLS QOS INTERFACE" on
page 1766
"SHOW MLS QOS MAPS COS-
QUEUE" on page 1769
"SHOW MLS QOS MAPS DSCP-
QUEUE" on page 1770
"SHOW MLS QOS MAPS POLICED-
DSCP" on page 1773
"TRUST DSCP" on page 1774
Table 233. Quality of Service Commands (Continued)
Policy Map
Class
Policy Map
Class
Global
Configuration
Policy Map
Class
Policy Map
Class
Policy Map
Class
Interface
Configuration
User Exec and
Privileged Exec
User Exec and
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Policy Map
Class
Mode
Configures a single-rate policer for a
class map.
Create a twin-rate policer for a class
map.
Creates a policy map and enters the
Policy Map Configuration mode.
Sets the CoS value of classified traffic.
Sets the DSCP value of classified
traffic.
Sets the egress queue of the
classified traffic.
Associates a policy map with an
interface.
Displays a QoS class map.
Displays a Policy map.
Displays the status of QoS.
Displays the aggregate policers
assigned on the switch.
Displays the scheduling methods of
the ports, and for Weighted Round-
Robin (WRR) based scheduling, the
assignments of weights to egress
queues.
Displays the mappings of CoS priority
values to egress queues.
Displays the mappings of DSCP
priority values to port egress queues.
Displays the mappings of an existing
DSCP to a new DSCP value.
Enables the pre-mark DSCP map to
replace the bandwidth class, DSCP,
and queue of classified traffic.
AT-8100 Switch Command Line User's Guide
Description
1693