Service Https - Allied Telesis AT-8100L/8 User Manual

SERVICE HTTPS

Syntax
service https
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate the HTTPS web server on the switch. The
switch supports secure HTTPS web browser management sessions when
the server is activated. Here are the preconditions to activating the server:
 The non-secure HTTP server on the switch must be disabled. For
instructions, refer to "NO SERVICE HTTP" on page 1442.

The switch must have an HTTPS certificate that was designated as
the active certificate with the IP HTTPS CERTIFICATE command.
Confirmation Command
"SHOW IP HTTPS" on page 1471
Example
This example activates the HTTPS web server on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# service https
AT-8100 Switch Command Line User's Guide
1467