Periodic - Allied Telesis AT-8100L/8 User Manual

PERIODIC

Syntax
day days-of-the-week time (hh:mm:ss)
periodic
of-the-week time (hh:mm:ss)
Parameters
day
Specifies a day of the week. The first occurrence of this parameter
specifies the starting day that the associated time range begins.
The second occurrence of this parameter specifies the ending day.
Enter one of the following for the beginning day and another for the
ending day:
- Monday
- Tuesday
- Wednesday
- Thursday
- Friday
time
Indicates the time of day which is expressed in a 24-hour clock and
specified in hours:minutes:seconds. The first occurrence of this
parameter specifies the starting time. The second occurrence of
this parameter specifies the ending time.
Mode
Time-Range mode
Description
Use this command to set the date and time range for Access Control List
filtering. The PERIOD command allows you to set reoccurring days of the
week and time of day for filtering.
To remove the date and time range, use the NO PERIODIC command.
Confirmation Command
"SHOW INTERFACE ACCESS-GROUP" on page 1637
AT-8100 Switch Command Line User's Guide
day days-
to
1631