Allied Telesis AT-8100L/8 User Manual page 1692

Chapter 101: Quality of Service (QoS) Commands
Command
"MATCH TCP-FLAGS" on page 1720
"MATCH VLAN" on page 1722
"MLS QOS AGGREGATE-POLICE
SINGLE-RATE" on page 1723
"MLS QOS AGGREGATE-POLICE
TWIN-RATE" on page 1726
"MLS QOS COS" on page 1729
"MLS QOS ENABLE" on page 1731
"MLS QOS MAP COS-QUEUE" on
page 1732
"MLS QOS MAP DSCP-QUEUE" on
page 1734
"MLS QOS MAP POLICED-DSCP" on
page 1736
"NO AUTO-QOS VOICE | TRUST
DSCP" on page 1738
"NO MATCH ACCESS-GROUP" on
page 1740
"NO MATCH PROTOCOL" on
page 1742
"NO MLS QOS AGGREGATE-
POLICE" on page 1744
"NO MLS QOS ENABLE" on
page 1745
"NO POLICE AGGREGATE" on
page 1746
"POLICE AGGREGATE" on
page 1747
1692
Table 233. Quality of Service Commands (Continued)
Class Map
Class Map
Policy Map
Class mode
Policy Map
Class mode
Interface
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Interface
Configuration
Class Map
Mode
Class Map
Mode
Global
Configuration
Global
Configuration
Policy Map
Class
Policy Map
Class
Mode
Sets one or more TCP flags for a
class map.
Sets a VLAN ID for a class map.
Configures a single-rate policer for a
class map and creates a police
aggregator.
Configures a twin-rate policer for a
class map and creates a police
aggregator.
Assigns a Class of Service (CoS)
user-priority value to untagged frames
that enter the specified interface.
Activates QoS on the switch. This
feature is disabled by default.
Maps CoS priorities to egress queues.
Maps DSCP priorities to egress
queues.
Maps an existing DSCP to a new
DSCP value.
Disables Auto-QoS support for a voice
VLAN and specifies CoS or DSCP
trusted traffic.
Removes an ACL name or number
from a class map.
Removes an Ethernet format and a
protocol from a class map.
Removes an association between a
police aggregator and a class map.
Disables QoS on the switch.
Disables a policer configured on a
class map.
Associates an aggregate name with a
class map.
Description