Table 195. Adding An Acl Group Name To A Class Map; Table 196. Adding An Acl Group Number To A Class Map - Allied Telesis AT-8100L/8 User Manual

Table 195. Adding an ACL Group Name to a Class Map

Command
awplus> enable
awplus# configure terminal
awplus(config)# class-map cmap3
awplus(config-cmap)# match access-
group icmppermit

Table 196. Adding an ACL Group Number to a Class Map

Command
awplus> enable
awplus# configure terminal
awplus(config)# class-map cmap7
awplus(config-cmap)# match access-
group 3015
number parameter allows you to add an access group to a class map by
specifying an ACL number.
For more information about this command, see "MATCH ACCESS-
GROUP" on page 1706.
The following example adds the group name "icmppermit" to a class map
named "cmap3:"
The following example adds ACL group number 3015 to a class map
named "cmap7:"
Description
Enters the Privileged Executive mode from the
User Executive mode.
Enters the Global Configuration mode.
Creates a class map cmap3 and enters the Class
Map mode.
Adds the ACL name "icmppermit" to class map
cmap3.
Description
Enters the Privileged Executive mode from the
User Executive mode.
Enters the Global Configuration mode.
Creates a class map called cmap7 and enters the
Class Map mode.
Adds the ACL group number 3015 to class map
cmap7.
AT-8100 Switch Command Line User's Guide
1647