No Ip Rip Send Version - Allied Telesis AT-8100L/8 User Manual

Chapter 107: Routing Information Protocol (RIP) Commands

NO IP RIP SEND VERSION

Syntax
no ip rip send version
Parameters
None
Mode
VLAN Interface mode
Description
Use this command to delete the version number of the routing updates
that the routing interface sends out.
Confirmation Command
"SHOW IP RIP INTERFACE" on page 1895
Example
The following example deletes the version setting for the routing updates
that the routing interface in VLAN 4 sends out:
awplus> enable
awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# no ip rip send version
1882