Chapter 107 : Routing Information Protocol (Rip) Commands; Table 258. Rip Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 107
Routing Information Protocol (RIP)
Commands
Command
"AUTO-SUMMARY" on page 1862
"DEFAULT-INFORMATION
ORIGINATE" on page 1863
"IP RIP AUTHENTICATION STRING"
on page 1864
"IP RIP AUTHENTICATION MODE"
on page 1865
"IP RIP RECEIVE-PACKET" on
page 1866
"IP RIP RECEIVE VERSION" on
page 1867
"IP RIP SEND-PACKET" on
page 1869
"IP RIP SEND VERSION" on
page 1870
"IP RIP SPLIT-HORIZON" on
page 1871
"NETWORK" on page 1873
The RIP commands are summarized in Table 258 and described in detail
within the chapter.

Table 258. RIP Commands

Routing
Configuration
Routing
Configuration
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
VLAN Interface
Routing
Configuration
Mode
Activates automatic route
summarization.
Configures the switch to send its
default route from the RIP-enabled
routing interfaces.
Specifies an authentication key or
password that a routing interface uses
to authenticate the routing updates.
Specifies the MD5 or plain-text
authentication mode for an
authentication key or password on a
routing interface.
Enables the VLAN interface to receive
routing updates.
Specifies the version of routing
updates accepted on the VLAN
interface.
Enables the VLAN to send routing
updates.
Specifies the version of routing
updates that the VLAN interface
sends.
Activates split-horizon or split-horizon
with poison reverse on the routing
interfaces.
Specifies a network or VLAN to allow
the interface to send and accept
routing updates.
Description
1859