Mls Qos Aggregate-Police Single-Rate - Allied Telesis AT-8100L/8 User Manual

MLS QOS AGGREGATE-POLICE SINGLE-RATE

Syntax
mls qos aggregate-police <
<EBS> action [drop-red|policed-dscp-transmit]
Parameters
name
Indicates the name of the police aggregator.
cir
Specifies the Committed Information Rate (CIR) of 1 to 16,000,000
Kbps.
cbs
Specifies the Committed Burst Size (CBS) of 0 to 16,777,216
bytes.
ebs
Specifies the Excess Burst Size (EBS) of 0 to 16,777,216 bytes.
action
Specifies the action taken if the rate is exceeded. Choose from the
following options:
drop-red: Drops the red packets.
policed-dscp-transmit: Modifies the packets using the policed
DSCP map and then sends the packets.
Mode
Global Configuration mode
Description
Use this command to create a single-rate aggregate policer for a class
map and create a police aggregator. The police aggregator can be applied
to multiple class maps with the POLICE AGGREGATE command. See
"POLICE AGGREGATE" on page 1747.
AT-8100 Switch Command Line User's Guide
name
> single-rate
<CIR> <CBS>
1723