Default-Information Originate - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

DEFAULT-INFORMATION ORIGINATE

Syntax
default-information originate
Parameter
None
Mode
Router Configuration mode
Description
Use this command to configure the switch to send its default route to its
neighboring routing devices.
Confirmation Command
"SHOW RUNNING-CONFIG" on page 164
Example
The following example configures the switch to send its default route from
its routing interfaces:
awplus> enable
awplus# configure terminal
awplus(config)# router rip
awplus(config-router)# default-information originate
1863