Displaying Qos Settings; Table 232. Qos Display Commands - Allied Telesis AT-8100L/8 User Manual

Chapter 100: Quality of Service (QoS)

Displaying QoS Settings

To Do This Task
Displays the status of the QoS feature.
Displays the contents of a class map
when a class map name is specified.
Without a class map name, it displays
all class maps configured on the
switch.
Displays the settings of the given policy
map. Without a policy-map name,
displays a list of all the QoS policy
maps configured on the switch.
Displays all configured aggregate
policers on the switch.
Displays the scheduling methods of the
specified port and, for weighted round
robin scheduling, the assignments of
weights to egress queues.
1684
There are eight commands that display the QoS settings. See Table 232
for a description of these commands. The following sections provide
additional descriptions of the commands, as well as examples of the
displays:
 "Displaying QoS Status" on page 1685
 "Displaying a Class Map" on page 1685
 "Displaying a Policy Map" on page 1686
 "Displaying Aggregate Policers" on page 1686

"Displaying QoS Scheduling Information" on page 1686

"Displaying CoS to Queue Mappings" on page 1687

"Displaying DSCP to Queue Mappings" on page 1688

"Displaying DSCP to Policed-DSCP Values" on page 1689
Note
To display information about QoS Storm Control, see "Displaying
Port Storm Status" on page 1791.

Table 232. QoS Display Commands

show mls qos
show class-map
show policy-map
show mls qos aggregate-policer
show mls qos interface
Use This Command
class-map-name
policy-map-name
port
name