Allied Telesis AT-8100L/8 User Manual page 1577

Table 191. Protocol Numbers (Continued)
Number
134
135
136
137
138
139 - 252
253 - 254
255
Confirmation Commands
"SHOW ACCESS-LIST" on page 1635 and "SHOW INTERFACE
ACCESS-GROUP" on page 1637
Examples
This example adds a deny access list to port 2 to discard all untagged
ingress packets of protocol 28, regardless of the source or destination
address. The access list is assigned the ID number 3016:
awplus> enable
awplus# configure terminal
awplus(config)# access-list 3016 deny proto 28 any any
awplus(config)# interface port1.0.2
awplus(config_if)# access-group 3016
awplus(config_if)# end
awplus# show access-list
awplus# show interface port1.0.2 access-group
This example adds a deny access list to ports 5 and 6 so that they discard
all tagged ingress packets that have the protocol 17 number and the VID
12, and are from the 152.12.45.0 subnet. The access list is assigned the
ID number 3011:
awplus> enable
awplus# configure terminal
awplus(config)# access-list 3011 deny proto 17 152.12.45.0/
24 any vlan 12
awplus(config)# interface port1.0.5,port1.0.6
AT-8100 Switch Command Line User's Guide
Description
RSVP-E2E-IGNORE / RFC3175
Mobility Header / RFC3775
UDPLite / RFC3828
MPLS-in-IP / RFC4023
MANET Protocols / RFC-ietf-manet-iana-
07.txt
Unassigned / IANA
Use for experimentation and testing /
RFC3692
Reserved / IANA
1577