Table 189. Periodic Time Range Example - Allied Telesis AT-8100L/8 User Manual

Chapter 98: Advanced Access Control Lists (ACLs)
Command
awplus(config-time-range)#
absolute start 8:00:00 01
02 2012 end 17:00:00 29 02
2012
awplus(config-time-range)#
exit
awplus(config)# exit
awplus# show time-range
Command
awplus> enable
awplus# configure terminal
awplus(config)# time-range
t1
awplus(config-time-range)#
periodic weekdays time
07:00:00 to time 16:00:00
awplus(config-time-range)#
exit
awplus(config)# exit
awplus# show time-range
1550
Table 188. Absolute Time Range Example (Continued)
The following example creates a time range setting that starts on Mondays
through Fridays from 7 am to 4 pm.

Table 189. Periodic Time Range Example

Description
Set the time range to begin on February 1, 2012
at 8 am and end on February 29, 2012 at 5 pm.
Exit the Time Range mode.
Exit the Global Configuration mode.
Display the time ranges configured on the
switch.
Description
Enter the Privileged Executive mode from the
User Executive mode.
Enter the Global Configuration mode.
Create a time range called "t1."
Set the time range to begin on Mondays at 7 am
and end on Fridays at 4 pm.
Exit the Time Range mode.
Exit the Global Configuration mode.
Display the time ranges configured on the
switch.