No Ip Route - Allied Telesis AT-8100L/8 User Manual

NO IP ROUTE

Syntax
no ip route ipaddress1/mask ipaddress2 [admin]
Parameters
ipaddress1
Specifies the IP address of the destination network, subnet, or
node. The IP address for the default route is 0.0.0.0/0.
mask
Specifies the mask of the IP address. The mask represents the
number of bits, from left to right, that constitute the network portion
of the address. The mask may be entered in IP notation (e.g.,
255.255.255.0) or decimal notation (e.g., /24).
ipaddress2
Specifies the IP address of the next hop of the route.
admin
Specifies the administrative distance of the route. This parameter
is optional.
Mode
Global Configuration mode
Description
Use this command to delete static routes and the default gateway from the
routing table. The command to delete the default gateway must include the
IP address of the next hop.
Confirmation Command
"SHOW IP ROUTE" on page 1843
Examples
This example deletes a static route that has the destination network
156.78.101.0, mask 255.255.255.0, and next hop 145.20.11.132:
awplus> enable
awplus# configure terminal
awplus(config)# no ip route 156.78.101.0 255.255.255.0
145.20.11.132
AT-8100 Switch Command Line User's Guide
1839