Aaa Authentication Enable (Tacacs+) - Allied Telesis AT-8100L/8 User Manual

AAA AUTHENTICATION ENABLE (TACACS+)

Syntax
aaa authentication enable
Parameters
default
Indicates the default accounting method list.
group
Indicates the user server group. Specify the following:
tacacs: Uses all TACACS+ servers.
local
Indicates that authentication using the password provided in the
ENABLE PASSWORD command is attempted if a TACACS+
server is not available. For information about this command, see
"ENABLE PASSWORD" on page 1384. This is an optional
parameter.
Mode
Global Configuration mode
Description
Use this command to enable the TACACS+ password on the switch. This
password is used to verify the TACACS+ server, thereby providing another
layer of security. By default, the AAA AUTHENTICATION ENABLE
command is disabled.
Note
This command only applies to TACACS+ clients.
Use the no form of this command, NO AAA AUTHENTICATION ENABLE,
to disable the TACACS+ password on the switch.
Confirmation Commands
"SHOW TACACS" on page 1510
Examples
To enable the TACACS+ password on the switch and specify
authentication using the password provided in the ENABLE PASSWORD
AT-8100 Switch Command Line User's Guide
default group
tacacs [
local
]
1493