Show Radius; Table 156. Show Radius Command - Allied Telesis AT-8100L/8 User Manual

Chapter 97: RADIUS and TACACS+ Client Commands

SHOW RADIUS

1508
Syntax
show radius
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display the configuration of the RADIUS client. Here
is an example of the client information.
RADIUS Global Configuration
Source Interface
Timeout
Server Host : 192.168.1.75
Authentication Port : 1812
Accounting Port
Figure 248. SHOW RADIUS Command
The fields are defined in this table.

Table 156. SHOW RADIUS Command

Parameter
Source Interface
Timeout
Server Host
Authentication Port
: 192.168.3.97
: 5 sec
: 1813
Description
An IP address assigned to an interface on
the switch that is the source of all
outgoing RADIUS packets. WIth hardware
stacking, this the source address of the
master switch.
The length of the time, in seconds, that
the switch waits for a response from a
RADIUS server to an authentication
request, before querying the next server
in the list.
The IP address of a RADIUS server on
the network.
The authentication protocol port.