Table 226. Auto-Qos With Trust Cos Functionality Example - Allied Telesis AT-8100L/8 User Manual

Table 226. Auto-QoS with Trust CoS Functionality Example

Command
awplus (config)# mls qos enable
awplus (config)# class-map trustcos
awplus (config)# policy-map AutoQos
awplus (config-pmap)# class trustcos
awplus (config)# mls qos map cos-
queue 0 to 1
awplus (config)# mls qos map cos-
queue 1 to 1
awplus (config)# mls qos map cos-
queue 2 to 1
awplus (config)# mls qos map cos-
queue 4 to 1
awplus (config)# mls qos map cos-
queue 3 to 5
awplus (config)# mls qos map cos-
queue 6 to 5
awplus (config)# mls qos map cos-
queue 7 to 5
awplus (config)# mls qos map cos-
queue 5 to 7
Auto-QoS Functionality
In the following example, the CoS value of ingress traffic is trusted:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# auto-qos trust cos
See Table 226 for a list of commands that are contained in this macro.
AT-8100 Switch Command Line User's Guide
Description
Activates the QoS feature on the switch.
Creates a class map called "trustcos."
Creates a policy map called "AutoQoS" and
enters the Policy Map Configuration mode.
Enters the "trustcos" class map.
Maps CoS priority 0 to egress queue 1.
Maps CoS priority 1 to egress queue 1.
Maps CoS priority 2 to egress queue 1.
Maps CoS priority 4 to egress queue 1.
Maps CoS priority 3 to egress queue 5.
Maps CoS priority 6 to egress queue 5.
Maps CoS priority 7 to egress queue 5.
Maps CoS priority 5 to egress queue 7.
1675