Allied Telesis AT-8100L/8 User Manual page 1821

awplus# configure terminal
awplus(config)# interface vlan4
awplus(config-if)# ip address 149.35.67.11/24
awplus(config-if)# interface vlan5
awplus(config-if)# ip address 149.35.68.24/24
awplus(config-if)# interface vlan11
awplus(config-if)# ip address 149.35.69.23/24
awplus(config-if)# interface vlan15
awplus(config-if)# ip address 149.35.70.45/24
awplus(config-if)# end
awplus# show ip interface
IPv4 decimal masks 16 and 24 are equivalent to masks 255.255.0.0 and
255.255.255.0, respectively.
There are four local networks in the example, and each network must have
its own routing interface. Here are the commands for creating the routing
interfaces:
At this point, the switch begins to route IPv4 packets among the four local
networks.
AT-8100 Switch Command Line User's Guide
Enter the Global Configuration
mode.
Enter the VLAN Interface mode for
the Sales VLAN with the ID 4.
Create the IP routing interface
149.35.67.11 in the Sales VLAN.
Enter the VLAN Interface mode for
the Production VLAN with the ID 5.
Create the IP routing interface
149.35.68.24 in the Production
VLAN.
Enter the VLAN Interface mode for
the Engineering VLAN with the ID
11.
Create the IP routing interface
149.35.69.23 in the Engineering
VLAN.
Enter the VLAN Interface mode for
the Inventory VLAN with the ID 15.
Create the IP routing interface
149.35.70.45 in the Inventory
VLAN.
Return to the Privileged Exec
mode.
Confirm the new routing
interfaces.
1821