Shutting Down A Port; Table 246. Setting Storm Control Action: Shutting Down A Port - Allied Telesis AT-8100L/8 User Manual

Chapter 102: QoS Storm Control Protection
Table 245. Setting Storm Control Action: Disabling a Port (Continued)
awplus(config-pmap)# class
cmap1
awplus(config-pmap-c)# storm-
protection
awplus(config-pmap-c)# storm-
action portdisable
Shutting Down a
Port

Table 246. Setting Storm Control Action: Shutting Down a Port

awplus> enable
awplus# configure terminal
awplus(config)# mls qos enable
awplus(config)# policy-map
pmap1
awplus(config-pmap)# class
cmap1
awplus(config-pmap-c)# storm-
protection
awplus(config-pmap-c)# storm-
action linkdown
1788
Command
The following example sets the storm protection action to shut down the
port assigned to the policy map named "pmap1." See Table 246.
Command
Description
Associates an existing class map, called
"cmap1," to policy map "pmap2" and
enters the Policy Map Class mode.
Enables the QSP feature.
Sets the storm action to disable a port.
Description
Enters the Privileged Executive mode
from the User Executive mode.
Enters the Global Configuration mode.
Activates the QoS feature on the switch.
Creates a policy map called "pmap1" and
enters the Policy Map mode.
Associates an existing class map, called
"cmap1," to policy map "pmap1" and
enters the Policy Map Class mode.
Enables the QSP feature.
Sets the storm action to shut down a
port.