Enabling The Telnet Server - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

Enabling the Telnet Server

To enable the server, go to the Global Configuration mode and issue the
SERVICE TELNET command. Here is the command:
awplus> enable
awplus# configure terminal
awplus(config)# service telnet
Once the server is started, you can conduct remote management sessions
over your network from Telnet clients, provided that the switch has a
management IP address. For instructions on how to start a remote Telnet
management session, refer to "Starting a Remote Telnet or SSH
Management Session" on page 72.
1395