Table 239. Show Mls Qos Aggregate-Policer Command Description - Allied Telesis AT-8100L/8 User Manual

Table 239. SHOW MLS QOS AGGREGATE-POLICER Command Description

Field
AGGREGATE-POLICER-
NAME
Policer single-rate
Policer twin-rate
action
.
Indicates the name of the aggregate policer.
Indicates the police aggregator is single-rate and was created
with the MLS QOS AGGREGATE-POLICE SINGLE-RATE
command. It contains the following definitions:
 average rate: Specifies the Committed Information
Rate (CIR) of 1 to 16,000,000 Kbps.
 minimum burst: Specifies the Committed Burst Size
(CBS) of 0 to 16,777,216 bytes.
 maximum burst: Specifies the Excess Burst Size
(EBS) of 0 to 16,777,216 bytes.
Indicates the police aggregator is twin-rate and was created
with the MLS QOS AGGREGATE-POLICE TWIN-RATE
command. It contains the following definitions:
 minimum rate: Specifies the Committed Information
Rate (CIR) of 1 to 16,000,000 Kbps.
 maximum rate: Specifies the Peak Information Rate
(PIR) of 0 to 160,000,000 Kbps.
 minimum burst: Specifies the Committed Burst Size
(CBS) of 0 to 16,777,216 bytes.
 maximum burst: Specifies the Peak Burst Size (PBS)
of 0 to 16,777,216 bytes. The suggested minimum is
15,000 bytes.
Specifies the action taken if the rate is exceeded. There are
two options:
 drop-red indicates that red packets are dropped.
 policed-dscp-transmit indicates the packets are
modified using the policed DSCP map and then sends
the packets.
Example
This example displays the contents of the aggregate policer, called "ap1:"
awplus# show mls qos aggregate-policer ap1
AT-8100 Switch Command Line User's Guide
Description
1765