Adjusting The Footrest (Footplate); Fastening / Removing The Calf Strap; Seat Cushion / Backrest Upholstery - Otto Bock Ventus Instructions For Use Manual

6.3.1.1 Adjusting the footrest (footplate)

The heights and angles of the "Angle-adjustable" footrest (see Fig. 10) and footrest for short lower leg lengths (not
pictured) can be adjusted by the qualified personnel. It is also possible to install heel blocks on both sides to stop
the feet from sliding into the area around the castor wheels.
The "Fixed" footplate (see Fig. 11) can have its height adjusted by the qualified personnel.
Subsequent adjustments may be made only by qualified personnel.

6.3.1.2 Fastening / removing the calf strap

The calf strap offers additional support to the user's legs. It can be removed for cleaning.
Fastening the calf strap
1) Guide the calf strap around the frame tube above the castor attachment device (see Fig. 12, item 1).
2) Close the hook-and-loop closure (see Fig. 12, item 2).
Removing the calf strap
1) Open the hook-and-loop closure.
2) Remove the calf strap from the frame tube.

6.3.2 Seat cushion / backrest upholstery

CAUTION
Seat cushion or backrest cover may ignite
User may sustain burns
► The seat cushion and backrest cover are not highly flammable, but there is a possibility they may catch fire.
Therefore utmost caution is required near open flame.
► Keep away from any sources of fire, especially burning cigarettes.
Ventus
10
12
Usage
11
Ottobock | 15