Adjusting The Footrest (Footplate); Fastening/Removing The Calf Strap; Seat Cushion And Back Upholstery - Otto Bock VENTUS Instructions For Use Manual

Hide thumbs Also See for VENTUS:

Table of Contents

Use

The angle of the footplate has been set by the qualified personnel so that it allows the ankles to rest in a comfort

able position (adjustment is not possible with a "fixed" footrest).

6.4.1 Adjusting the footrest (footplate)

The heights and angles of the "angle-adjustable" footrest (see fig. 10) and footrest for short lower leg lengths (not

pictured) can be adjusted by the qualified personnel. It is also possible to install heel blocks on both sides to stop

the feet from sliding into the area around the caster wheels.

The "fixed" footplate (see fig. 11) can be adjusted in height by qualified personnel.

Subsequent adjustments may be made only by qualified personnel.

The calf strap offers additional support for the user's legs. It can be removed for cleaning.

Fastening the calf strap

1) Guide the calf strap around the frame tube above the caster attachment device (see fig. 12, item 1).

2) +Close the hook-and-loop closure (see fig. 12, item 2).

Removing the calf strap

1) Unfasten the hook-and-loop closure.

2) Remove the calf strap from the frame tube.

WARNING

Seat cushion and back padding may ignite

Burns due to user error

► The seat and backrest upholstery as well as padding fulfil the requirements for flame resistance according to

ISO 8191-2 and DIN EN 1021-2. However, they may still ignite if fire is handled improperly or negligently.

► Keep away from all ignition sources, especially lit cigarettes.

14 | Ottobock

Ventus

Table of Contents