Frame Type Set - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
(7) SSL/TLS
• To set whether or not to use SSL/TLS during communications carried out with the
Functions
LDAP server.
Use • To use SSL/TLS during communications carried out with the LDAP server.
• The default setting is "OFF".
Setting/
Procedure
(8) Port Number
Functions
• To change the port number used for communications with the LDAP server.
Use
• The default setting is "389".
Setting/
Procedure
(9) Initialize Setting
Functions
• To format all settings made in LDAP Server Setting.
Use
Setting/ 1. Touch the [Initialize Setting].
Procedure 2. Select [Yes] and touch [Enter].
(10) Check Connection
Functions
• To check connection to the LDAP server.
Use
1. Touch the [Check Connection].
Setting/
2. When the message indicating the completion of connection check appears, touch
Procedure
[Enter].
9.5.7

Frame Type Set

Functions • To set the frame type for NetWare settings of NIC.
Use • To specify the frame type used for communications.
• The default setting is "Auto Detect".
Setting/
Procedure
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ON "OFF"
1 to 65535
"Auto Detect" Ethernet-II
802.3 SNAP
9. Utility/Counter Mode
802.2
137