6. Mechanical adjustment
6.2
Registration (FD)
NOTE
Make this adjustment after any of the following procedures has been performed.
• When the PH Unit has been replaced.
• When the image on the copy is offset in the FD direction.
1. Display Tech. Rep. Mode.
For details of how to display the Tech. Rep. Mode screen, see the Adjustment/Setting
of the main unit service manual.
18
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
2. Press the Stop key followed by the
Start key to display the Adjust Mode.
3. Touch the [Printer].
4061F3C517DA
4. Touch the [Registration (FD)].
4061F3C518DA
5. Touch the [Test Print].
4061F3C521DA
6. Touch the [Tray 3] or [Tray 4].
7. Press the Start key.
4061F3C520DA
Field Service Ver. 1.0 Aug. 2005