Konica Minolta bizhub 250 Service Manual page 475

11. Soft Switch List
MODE
Bit:
352
Bit Feature
7 Notification of result
(Network function) *
6 Position for adding Gate-
way TSI <*>
5 Specify whether to add
TSI when forwarding <*>
4 Position for adding TSI
when forwarding <*>
NOTE
• The features with (*) are settable by users. *: Screen setting <*>: Soft switch setting
MODE
Bit:
353
Bit Feature
7 Text insertion into docu-
ment to send
(Network function) *
6 Header printing on
received document
(Network function) *
4 Insert arbitrary text mes-
sage *
3 Display arbitrary text mes-
sage screen
NOTE
• The features with (*) are settable by users. *: Screen setting
• Predetermined text: Image data (TIFF-F format) has been attached to the E-mail.
106
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Factory setting bit
7 6 5 4 3 2 1 0
1 1 0 1 0 0 0 0
Logic
0 1
No Yes
Outside Inside of
of docu- docu-
ment
ment
Not add Add
Outside Inside of
of docu- docu-
ment ment
Factory setting bit
7 6 5 4 3 2 1 0
1 0 0 0 1 0 0 0
Logic
0 1
No Yes
No Yes
No Yes
No Yes
Field Service Ver. 1.0 Aug. 2005
HEX:D0
Description
Specify whether a communication error
message is returned to the sender when
a communication error occurs with code
E6xxxx when E-mail is received.
Specify where to add the TSI when for-
warding through Gateway transmission
(Direct FAX, IP Relay).
Specify whether to add TSI when for-
warding received documents.
Select where to add the TSI when for-
warding received documents.
HEX:88 (For U.S.)
HEX:80 (For Europe)
Description
Specify whether to insert a preset text
message at the head of a stored docu-
ment image to be transmitted by E-mail.
Specify whether to print a header on
documents received via E-mail.