Paper Type Set (Bypass) - Konica Minolta BIZHUB PRO C500 User Manual

[6] Paper Type / Special Size Set

[2] Paper Type Set (Bypass)

Use this function to specify six combinations of paper type and weight for the Multi-
sheet bypass tray. Specified combinations will be used when selecting Bypass on
the Basic Screen.
NOTE:
Service setting is required to use the paper types Excl, A to J.
Contact your service representative, if desired.
Key Operator Mode Screen
Procedure
1 Touch [6] Paper type / Special size set to display the Paper Type / Special Size
Setting Menu Screen.
2 Touch [2] Paper type set (Bypass). The Paper Type Setting Screen will be
displayed.
3 Select the paper type and weight in combination to be loaded in the Multi-sheet
bypass tray.
(1) Touch the desired key in the Special setting section to highlight it.
(2) Touch the desired paper type and weight keys to highlight them. To select a
type from Excl. A to J, use up/down arrow key to display the desired type on
the key above, then touch the key to highlight it.
The selected paper type and number indicating the paper weight will appear
on the tray key.
Repeat steps (1) and (2) for all the six keys.
4 Touch OK on the Paper Type Setting Screen to complete the setting and return
to the Paper Type / Special Size Setting Menu Screen, or touch CANCEL to
restore the previous setting.
5 Touch PREVIOUS SCREEN to return to the Key Operator Mode Screen.
14-24
Paper Type / Special Size Setting Menu Scree
Paper Type Setting Screen (Multi-Sheet Bypa