Replacing The Tray 2 Pick-Up Roller - Konica Minolta bizhub 250 Service Manual

4. Periodical check
[14]
[19]
[20]
[22]
4.5.7

Replacing the Tray 2 Pick-up Roller

26
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
[14]
[15]
4040F2C529DA
[16]
[17]
[18]
4040F2C530DA
[21]
4040F2C531DA
[1]
4040F2C524DA
[3]
[2]
4040F2C526DA
Field Service Ver. 1.0 Aug. 2005
9. Remove two C-clips [14] and the
bearing [15].
10. Remove the C-clip [16], E-ring [17],
bearing [18] and spring [19] to
remove the Tray 2 Feed Roller Assy
[20].
11. Remove the C-clip [21] and the Tray
2 Feed Roller [22].
12. To reinstall, reverse the order of
removal.
13. Select [Tech. Rep. Mode] →
[Counter] → [Special Parts Counter]
→ [Tray 2] and clear the counter.
1. Slide out the Tray 2.
2. Remove the Multi Bypass Unit.
71
3. Remove the Lower Right Cover [1].
4. Remove two screws [2] and the
Transport Roller Cover [3].