Sheet-Through-Adf - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
F. Fuser Temp.
• To adjust the temperature of the Fusing Roller for each paper type in order to change
Functions
the fusing performance according to the operating environment and paper type.
• To adjust the fusing temperature for each type of paper.
Use • When a fusing failure occurs.
• When the paper type is changed.
• The default setting is "1".
Adjustment
• Setting Range: 1 to 4 (Normal)
Range
1. Call the Tech. Rep. Mode to the screen.
2. Touch the keys in this order: [Tech. Rep. Choice] → [Printer] → [Fuser Temp.].
3. Select the paper, for which the adjustment is made.
Adjustment
4. Press the Clear key and change the setting value using the 10-Key Pad
Procedure
5. Touch [END] to validate the new setting value.
• For more details, see the temperature table for fusing temperature adjustment.
157
11.3.3

Sheet-through-ADF

A. Registration Loop
Functions • To adjust the length of the loop formed in the paper before the Registration Rollers.
• If slippage occurs due to a worn Document Take-Up Roller, which sometimes results in
Use misfeeds, the loop length may be increased as a temporary measure until the part can
be replaced with a new one.
Setting/ For details on adjustment, see the Service Manual for Option DF-605.
Procedure
B. Zoom
• To set the scanning zoom ratio in the main and sub scanning directions of the Sheet-
Functions
through-ADF.
Use • Upon setup of the Automatic Document Feeder
Setting/ For details on adjustment, see the Service Manual for Option DF-605.
Procedure
C. Feed (CD)
• To adjust the scan start position in the main scanning direction (CD) of the Sheet-
Functions
through-ADF.
Use • Upon setup of the Automatic Document Feeder
Setting/ For details on adjustment, see the Service Manual for Option DF-605.
Procedure
D. Feed (FD)
• To adjust the scan start position in the sub scanning direction (FD) of the Sheet-
Functions
through-ADF.
Use • Upon setup of the Automatic Document Feeder
Setting/ For details on adjustment, see the Service Manual for Option DF-605.
Procedure
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
1 to 3 (Thick Paper)
1 to 3 (Thin Paper)
11. Tech. Rep. Mode
1 to 3 (OHP)
155