Field Service Ver. 1.0 Aug. 2005
9.4
Settings in the User Management
9.4.1
Confirmation Beep
Functions
• To set whether or not to produce a sound when a key in the Keypad is pressed.
Use
• To change whether or not to produce a sound when a key in the Keypad is pressed.
• The default setting is "3".
Setting/
Procedure
9.4.2
Alarm Volume
• To specify the volume of the alarm that sounds when an error occurs or an incorrect
Functions
operation is specified.
• To change the volume of the alarm that sounds when an error occurs or an incorrect
Use
operation is specified.
• The default setting is "3".
Setting/
Procedure
9.4.3
Job Complete Beep
Functions
• To set the volume of the beep that sounds when a job is completed.
Use
• To change the volume of the beep that sounds when a job is completed.
• The default setting is "3".
Setting/
Procedure
9.4.4
Panel Cleaning
Functions
• To disable control panel key operations.
Use
• To disable control panel keys before cleaning the display on the control panel.
Setting/
• To cancel this function, press the Panel Reset key to display the Basics screen.
Procedure
9.4.5
Dehumidify
• To dehumidify the Scanner when dew condensations are formed on the Scanner
Functions
because of sudden changes in temperature or high humidity.
• To prevent dew condensations from being formed on the Photo Conductor during
Use
changes in ambient conditions.
• When [Dehumidify] is touched, the Photo Conductor or Exposure Lamp is operated for
Setting/
a predetermined period of time and then stops in the mode set by the corresponding
Procedure
Tech. Rep. Choice function.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
0 to 5
0 to 5
0 to 5
9. Utility/Counter Mode
125