Toner Supply - Konica Minolta bizhub 250 Service Manual

9. Utility/Counter Mode
9.4.6

Toner Supply

• To adjust the set toner-to-carrier level by providing an auxiliary supply of toner when a
Functions low image density occurs due to a lowered toner-to-carrier ratio after large numbers of
copies have been made of originals having a high image density.
Use • To replenish the supply of toner in an auxiliary manner.
• Touch [Toner Supply] for the copier to detect the current toner density and, if the den-
Setting/ sity is lower than the standard value, a toner-replenishing sequence, then a developer
Procedure agitation sequence are performed. If the toner density is detected to be higher than the
standard value, only a developer agitation sequence is performed.
126
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Field Service Ver. 1.0 Aug. 2005