Konica Minolta bizhub 250 Service Manual page 127

7. Other
[8]
[10]
[12]
88
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
7. Remove the Toner Supply Port [7].
[7]
4040F2C580DA
8. Remove the developer [8].
4040F2C581DA
Removal of the Developer
• Dump the developer on the Sleeve
Roller by rotating the gear in the
direction of the arrow.
• If you rotate the gear in reverse,
mylar for cleaning the ATDC Sensor
• Dump developer until almost no
developer sticks to the Sleeve
4040F2C582DA
Roller.
9. Remove two screws [9] and open the
Cover [10].
[9]
4040F2C745DA
10. Remove two screws [11], disconnect
[13]
the connector [12], and remove the
ATDC Sensor [13].
11. Add developer.
34
[11]
4040F2C746DA
Field Service Ver. 1.0 Aug. 2005