Konica Minolta bizhub 250 Service Manual page 426

Field Service Ver. 1.0 Aug. 2005
MODE
Bit:
007
Bit
7 Select upper limit of cut-off
length after printing:
6
When a received document
5
is longer than the print paper
and if the excess length is
shorter than that specified
here, it is cut off.
If it is longer than that value
specified with these bits, it is
split into multiple pages. This
feature is enabled when the
following 2 conditions are
satisfied:
• When printing a received
document
• When bit 1 of this mode is
1 <*>
4 Select upper limit of reduc-
tion ratio of received docu-
3
ment:
2
When a received document
is longer that the print paper,
it will be reduced to fit the
paper with the upper limit
specified with these bits. This
feature is enabled when the
following 2 conditions are
satisfied:
• When printing a received
document
• When bit 1 of this mode is
0
Example: The reduction is
100 to 90% when "90%" is
specified. <*>
1 Select cut off/reduction of
received document:
This bit specifies cutting off
or reducing a received docu-
ment that is longer than the
print paper.
(This feature is enabled when
printing a received docu-
ment.) <*>
0 Printing specification of
received document.
NOTE
• The features with (*) are settable by users. *: Screen setting <*>: Soft switch setting
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Factory setting bit
7 6 5 4 3 2 1 0
1 0 1 1 0 1 0 1
Feature
0
Bit 7-5:
Bit 4-2:
Reduc-
tion
First
page.
HEX:B9 (For U.S.)
HEX:B5 (For Europe)
Logic
1
000 0 mm
001 8 mm
010 12 mm
011 14 mm
100 18 mm
101 20 mm
110 24 mm
111 Not
available
000 100 %
001 95 %
010 90 %
011 85 %
100 80 %
101 65 %
110 60 %
111 Not
available
Cut off This bit determines that the received
document will be cut off with "Select
upper limit of cut off length after print-
ing (MODE 007 Bit 7 to 5)" or
reduced with "Select upper limit of
reduction ratio of received document
(MODE 007 Bit 4 to 2)."
All
pages.
11. Soft Switch List
Description
Reduction will not be
done if a received doc-
ument is still longer
than the paper for a
specified reduction.
57