Konica Minolta bizhub 250 Service Manual page 61

4. Periodical check
[6]
[7]
[11]
[9]
[13]
[14]
[16]
22
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
3. Remove the Connector [6].
4. Remove two screws [7] and the Tray
1 Feed Roller Assy [8].
[8]
4040F2C510DA
5. Remove four screws [9] and the Tray
[10]
1 Feed Roller Assy Cover [10] and
the Tray 1 Separator Roll Assy [11].
[9]
4040F2C512DA
[12]
6. Remove two C-clips [12] and two
bearings [13]. Then, remove the
Pick-up Roller Assy [14].
[13]
4040F2C517DA
7. Remove one C-clip [15] and the Tray
[15]
1 Pick-up Roller [16].
8. To reinstall, reverse the order of
removal.
9. Select [Tech. Rep. Mode] →
[Counter] → [Special Parts Counter]
→ [Tray 1] and clear the counter.
4040F2C518DA
Field Service Ver. 1.0 Aug. 2005