Print Lists; Report Settings - Konica Minolta bizhub 250 Service Manual

6. Utility/Counter Mode
B. Password Communication
(1) Communication Password
Functions • To allow a fax to be received only when there is a match in the password that has previ-
ously been registered on the transmitter and receiver ends.
Use • When using password reception
Setting/ • The default setting is "00".
Procedure
6.5.6

Print Lists

A. Setting List
Functions
• To print information concerning the initial settings of the machine.
Use
Setting/ 1. Touch the [Print Lists].
Procedure 2. Touch the [Setting List].
3. The setting list is printed.
6.5.7

Report Settings

A. TX Report
Functions • To set the mode of output of the report used for confirming results of transmission.
Use • When changing the mode of output of the report used for confirming results of trans-
mission
• Setting is made individually for a single destination and two or more destinations.
Setting/ <Single Dest>
Procedure
<Broadcasting>
B. Activity Report
Functions • To select whether or not to print the activity report for every 50 transactions automati-
cally.
Use • When printing the activity report for every 50 transactions automatically.
Setting/ • The default setting is "ON".
Procedure
22
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"00" (Disabled) 01 to 99 (Enabled)
ON "If TX Fails"
ON "If TX Fails"
"ON" OFF
Field Service Ver. 1.0 Aug. 2005
OFF
OFF