13. Service Security Mode; 13.1 Service Security Mode Function Setting Procedure; Procedure; Exiting - Konica Minolta bizhub 250 Service Manual

13. Service Security Mode

13. Service Security Mode

13.1 Service Security Mode Function Setting Procedure

13.1.1

Procedure

1. Call the Tech. Rep. Mode to the screen.
2. Press the following keys in this order.
Stop → 0→ Clear Key
3. Select a function.
13.1.2

Exiting

• Press the Reset Key.

13.2 Service Security Mode Function Tree

Tech. Rep. Mode
Service Securuty Mode

13.3 Settings in the Service Security Mode

13.3.1

Service Code Change

Functions
• To change the service code used to access the Tech. Rep. mode, Initial mode, and
Maintenance mode.
Use
1. Call the Service Security mode from the Tech. Rep. mode and then touch [Service
Code Change].
2. Touch [Current Code] and enter the currently set 8-digit service code.
Setting/
3. Touch [New Code] and enter a new 8-digit service code.
Procedure
4. Touch [Retype New Code] and enter the new 8-digit service code once again.
• The "#" and "*" keys may be used in combination with the 10-Key Pad for entry of the
service code.
200
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Service Code Change
Field Service Ver. 1.0 Aug. 2005
4040F3E552DA
4040F3E553DA