Storage Paddle Drive Clutch - Konica Minolta bizhub 250 Service Manual

4. Other
4.3.13

Storage Paddle Drive Clutch

[1]
[2]
B. Reinstallation Procedure
1. Check that the 2-mm hole [2] of the storage paddle drive shaft [1] and the cutout of the
frame [3] are aligned and install the Storage Paddle Drive Clutch Assy [4].
2. Refer to the figure below and check the paddle position [5].
[1]
3. Hook the Solenoid Flapper [7] to the tab [6] of the Storage Paddle Drive Clutch Assy
[4].
4. Attach the C-ring and reinstall the Storage Paddle Drive Clutch Assy.
5. Adjust the spacing between the C-ring and the Storage Paddle Drive Clutch Assy to 0.2
mm and tighten two hexagonal socket head screws.
18
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
A. Removal Procedure
1. Remove the Sorted Copy Tray.
15
2. Remove the Horizontal Transport
Unit.
15
3. Remove the Horizontal Transport
Upper Cover.
4349F2C522DA
12
4. Remove the C-ring [1].
5. Loosen two hexagonal socket head
screws [2], and remove the Storage
Paddle Drive Clutch Assy [3].
[3]
4349F2C523DA
[3]
[2]
[7]
Field Service Ver. 1.0 Aug. 2005
[5]
[6]
4349F2C525DA
[4]