High Voltage Unit - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
7.3.18

High Voltage Unit

1. Open the Right Door.
2. Remove the Imaging Unit.
3. Remove the Upper Rear Cover.
50
4. Remove the Rear Cover.
51
5. Remove the Toner Suction Fan Motor.
86
[3]
[4]
[5]
[7]
[7]
[7]
[8]
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
6. Remove the screw [1] and unhook
two tabs [2] on the rear side surface.
Then, remove the Toner Suction
Duct [3].
[1]
[2]
4040F2C672DA
7. Unplug the connector [4] and remove
two screws [5] and the High Voltage
[6]
Unit Cover [6].
4040F2C609DA
8. Unplug four connectors [7] and
[9]
remove two screws [8] and the High
Voltage Unit [9].
[7]
4040F2C610DA
7. Other
61