Konica Minolta bizhub 250 Service Manual page 559

3. Other
NOTE
• Be sure to perform the following operation when the Variable Resistor is replaced.
8. Initialize the backup data.
21
9. Perform document width detection adjustment.
18
10. Turn OFF the Main Power Switch and turn it ON again and check whether size detec-
tion operates normally.
3.3.4 Complete Stamp Unit 2
[1]
[3]
[5]
[6]
14
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
1. Open the Upper Door [1].
2. Open the Processing Guide [2].
[2]
4344F2C534DA
3. Remove the screw [3] and the cover
[4].
[4]
4344F2C535DA
4. Remove the screw [5] and discon-
nect the connector [6], and remove
the Complete Stamp Unit 2 [7].
[7]
4344F2C536DA
Field Service Ver. 1.0 Aug. 2005