Konica Minolta bizhub 250 Service Manual page 564

Field Service Ver. 1.0 Aug. 2005
6.4 I/O Check
6.4.1 Sheet-through-ADF (2-sided)
Functions • To check sensors on the paper path.
Use • When a document misfeed occurs.
A. Check procedure
• To allow sensors to be checked for operation easily and safely, data applied to the IC on
the board can be checked on the panel with the main unit in the standby state (including
a misfeed, malfunction, and closure failure condition).
B. Procedure
1. Set the mode to the Tech. Rep. Mode.
2. Touch the [I/O Check].
3. Touch the [Sheet-through-ADF (2-sided)].
4. Operate the sensor to check by using paper or the like, and check the screen display.
(Paper detected: 1, No paper detected: 0)
C. I/O check screen
• This is only typical screen which may be different from what are shown on each individ-
ual main unit.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
6. Tech. Rep. Mode
4344F3E519DA
19