Konica Minolta bizhub 250 Service Manual page 75

4. Periodical check
[14]
[13]
15. Turn ON the main power switch.
16. Select Tech. Rep. Mode → [Function] → [F8] and press the Start key.
NOTE
• After replacing the developer, be sure to execute F8 under Function of Tech. Rep.
Mode.
• When the main power switch is turned ON, execute F8 quickly.
36
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
13. Install the four screws [13] to secure
the Photo Conductor Unit [14] and
Developing Unit [15].
14. Install the IU in the copier.
[13]
[15]
4040F2C586DA
Field Service Ver. 1.0 Aug. 2005