Replacing The Tray 1 Feed Roller - Konica Minolta bizhub 250 Service Manual

4. Periodical check
4.5.3

Replacing the Tray 1 Feed Roller

[2]
[3]
[5]
[4]
[6]
[7]
[11]
[9]
20
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
1. Remove the screw [1] and, holding
the stopper [2], remove Tray 1 [3].
[1]
4040F2C508DA
2. Remove two screws [4] and the Con-
nector Cover [5].
4040F2C509DA
3. Remove the Connector [6].
4. Remove two screws [7] and the Tray
1 Feed Roller Assy [8].
[8]
4040F2C510DA
5. Remove four screws [9] and the Tray
[10]
1 Feed Roller Assy Cover [10] and
the Tray 1 Separator Roll Assy [11].
[9]
4040F2C512DA
Field Service Ver. 1.0 Aug. 2005