Konica Minolta bizhub 250 Service Manual page 403

9. Tech. Rep. Mode
C. TX Condition
(1) Prints
Functions
• Service call for exceeding specified number of papers.
Use
Setting/ • The default setting is "ON".
Procedure
(2) Toner Empty
Functions
• Service call for empty toner.
Use
Setting/ • The default setting is "ON".
Procedure
(3) Drum Life
Functions
• Service call for reaching life cycle of drum.
Use
Setting/ • The default setting is "ON".
Procedure
(4) Malfunction
Functions
• To set whether or not to make a service call when a machine failure occurs.
Use
Setting/ • The default setting is "ON".
Procedure
D. Transmission Method
Functions • To set the transmission method.
Use • When changing the transmission method
Setting/ • The default setting is "Data".
Procedure
• Select [Report] for fax transmission, [Data] for data transmission, and [E-Mail] for e-mail
transmission.
E. Service FAX Number
Functions
• Enters the Fax number on a report when a notification to the call center fails.
Use
Setting/ 1. Touch [Service FAX Number] and enter the telephone number.
Procedure
34
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"ON" OFF
"ON" OFF
"ON" OFF
"ON" OFF
Report "Data"
Field Service Ver. 1.0 Aug. 2005
E-Mail