Ni-Mh Battery Replacement - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
4.3

Ni-MH battery Replacement

1. Check on the screen that the memory capacity still available for use reads 100%.
NOTE
• If the memory capacity does not read 100%, let the machine output contents of the
memory or wait until the machine completes transmission.
2. Turn OFF the Main Power Switch.
3. Remove the Upper Rear Cover.
For details, see Service Manual of the machine.
[2]
6. Turn ON the Main Power Switch.
NOTE
• After the Ni-MH battery has been replaced with a new one, be sure to turn ON the
Main Power Switch.
• Discard the used battery in accordance with the corresponding local regulations
and NEVER discard it or let it discharge on the user's premises.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
4. Unplug one connectors (CN10) [11]
of the MFB3 Board.
[1]
4040F2C738DA
5. Tie band [2] is cut with nippers, and
the Ni-MH battery [3] is replace.
[1]
4040F2C739DA
4. Disassembly/Reassembly
9