Konica Minolta bizhub 250 Service Manual page 229

11. Tech. Rep. Mode
<Authentication Setting>
• To set whether or not to enable authentication during transmission via the SMTP
Functions
server.
• Use to enable authentication during transmission.
Use
Types of authentication to be set: POP Before SMTP, SMTP authentication
• The default setting is "OFF"
* If POP Before SMTP is set, make the setting for POP Before SMTP.
Setting/ • The default setting is "60 sec"
Procedure
* If SMTP authentication is set, make the following settings.
User ID: Enter the user ID for SMTP authentication.
Password: Enter the password for SMTP authentication.
(4) TX/RX Test
Functions • To carry out the transmission/reception tests for CS Remote Care.
Use • To carry out the transmission/reception tests for CS Remote Care.
Setting/ • Press the Start key to start transmission.
Procedure • The test progress and results are displayed on the screen.
(5) Initial data
Functions • To initialize server settings.
Use • To initialize server settings.
• The default setting is "NO"
Setting/
Procedure
190
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
ON "OFF"
"60 sec" (0 to 60)
YES "NO"
Field Service Ver. 1.0 Aug. 2005