User's Choice 3/6 - Konica Minolta bizhub 250 Service Manual

Field Service Ver. 1.0 Aug. 2005
9.3.3

User's Choice 3/6

A. Low Power Mode
• To set the time until Low Power starts operating after the last key operation has been
Functions completed.
• Low Power: To turn LED and LCD OFF, and lower the power consumption.
Use • To change the time until Low Power starts.
• Use the 10-Key Pad for setting.
Setting/
• The default setting is "15 min."
Procedure
B. Sleep Mode
• To set the time until Sleep Mode starts operating after the last key operation has been
completed.
Functions
• Turn all lines OFF except 3.3 V line for Control.
• "OFF" will only be displayed when "Disable Sleep Mode" in Admin. Management is set.
Use • To change the time until the Sleep Mode starts.
• Use the 10-Key Pad for setting.
Setting/
• The default setting is "15 min."
Procedure
C. LCD Back-Light OFF
• To set the time until LCD Back-Light OFF starts operating after the last key operation
Functions
has been completed.
• To change the time until LCD Back-Light OFF starts operating after the last key opera-
Use
tion has been completed.
• Use the 10-Key Pad for setting.
Setting/
• The default setting is "1 min."
Procedure
D. Auto Reset
• To set the time until Auto Reset starts operating after the last key operation has been
Functions completed.
• Auto Reset: Resets the panel to the default settings.
• To change the time until Auto Reset starts operating after the last key operation has
Use
been completed.
• The default setting is "1 min."
Setting/
Procedure
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
"15 min." (10 to 240)
"15 min" (1 to 240)
"1 min" (1 to 240)
30 seconds "1 min"
3 min 5 min
9. Utility/Counter Mode
OFF
2 min
OFF
119