Eeprom; Remounting Of The Eeprom - Konica Minolta bizhub 250 Service Manual

7. Other
7.8

EEPROM

7.8.1

Remounting of the EEPROM

NOTE
• When the Mechanical Control Board is replaced with a new one, be sure to
demount the EEPROM (IC3A) from the old Mechanical Control Board and mount it
on the new Mechanical Control Board.
1. Remove the Upper Rear Cover.
50
2. Remove the Rear Cover.
51
[1]
[4]
110
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
[2]
4040F2C561DA
[3]
4040F2C562DA
A
A
4040F2C501DA
Field Service Ver. 1.0 Aug. 2005
3. Remove five screws [1] and Mechan-
ical Control Board Cover [2].
4. Unplug the all connectors.
5. Remove five screws [3] and Mechan-
ical Control Board [4].
6. Demount the EEPROM (IC3A) from
the new Mechanical Control Board.
7. Mount the EEPROM (IC3A) from the
old Mechanical Control Board to the
new Mechanical Control Board.
NOTE
• Note the alignment notch on the
EEPROM (IC3A) when mounting the
IC.