Finisher Operations; Cb-Fn Adjustment; Finisher Check - Konica Minolta bizhub C353 Service Manual

6. Finisher operations

6. Finisher operations
6.1

CB-FN adjustment

1
6.1.1

Finisher Check

A. Entering Finisher
1. Call the Service Mode to the screen.
See P.338 of the main body service manual.
2. Touch [Finisher].
3. Touch [CB-FN adjustment].
4. Touch [Finisher Check].
5. Touch the item one wants.
B. Finisher Check
(1) Staple CD Unit
• Returns the staple unit to the predetermined position after it moves to the 2-point stapling
position for A4.
→ Moves from the predetermined position to the inner 2-point stapling position for A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the front of A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
(2) Alignment Moving
• Aligning plates 1 and 2 return to the predetermined position after moving to the aligning
position for A4S.
→ Moves from the predetermined position to the second predetermined position for A4S.
→ Stops after the predetermined time.
→ Moves to the aligning position for A4S.
→ Stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
62
1
Field Service Ver. 3.0 Jan. 2008
A01GF3E506DA