Konica Minolta bizhub C353 Service Manual page 346

Field Service Ver. 3.0 Jan. 2008
<Model Name>
Functions
• To set the device name for identifying the copier when reporting the total counter.
Use
Setting/ 1. Touch [Model Name].
Procedure 2. Enter the model name (up to 20 one-byte characters) on the on-screen keyboard,
and touch [OK].
<Send Now>
Functions
• To transfer the current total counter value to the set address.
Use
(5) PING Confirmation
Functions • To set the TCP/IP network diagnosis by PING.
Use • To check the condition of TCP/IP network.
Setting/ 1. Touch [Host Address] for PING transmission.
Procedure 2. Select [Input Host Name], [IPv4 Address Input], or [IPv6 Address Input] and enter a
host address.
3. Touch [Check Connection] key to check the connection.
(6) SLP Setting
Functions
• To set whether to use SLP or not.
Device search will be available with TWAIN by setting SLP enable.
Use
Setting/ • The default setting is Enable.
Procedure
(7) LPD Setting
Functions
• To set whether to use LPD during printing or not.
Use
Setting/ • The default setting is Enable.
Procedure
(8) Prefix/Suffix Setting
<ON/OFF Setting>
Functions • To set whether to add prefix or suffix to the address when calling or entering an
address.
Use • To add prefix or suffix to the address.
Setting/ • The default setting is OFF.
Procedure
"Enable"
"Enable"
ON
8. Utility Mode
Disable
Disable
"OFF"
301