Shutter Drive Gear - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 3.0 Jan. 2008
3.4.21

Shutter drive gear

1. Remove the tray unit.
See P.25
2. Remove the tray unit front cover.
See P.23
3. Remove the tray unit rear cover.
See P.23
[2]
[6]
[4] [3]
[1]
A01GF2C545DA
[5]
[2]
[1]
9J08F2C527DA
4. Remove four screws [1] and remove
the shutter drive gear assy [2].
5. Remove two C-rings [1] and remove
the gear 1 [2], gear 2 [3] and gear 3
[4].
NOTE
• When installing the shutter drive
gear, fit the match marks [5] of gear
1 and [6] of gear 3 as shown in the
left illustration.
3. Other
55